A custom mesh cap with your logo costs $23.99, the same cap blank costs $16.99, the minimum order is one cap, and orders ship within the US with delivery in 7–14 business days after you approve the digital proof.
The numbers behind that answer
Every figure below comes from the current Outmora product and shipping rates — nothing here is an estimate you have to guess at later.
Logo cap vs blank cap
The only price difference between the two versions is the decoration itself. The cap shell, the closure, and the fit are the same on both.
- Cap with your logo: $23.99 per cap
- Blank cap, no decoration: $16.99 per cap
- Difference: $7.00 per cap
That $7 buys heat transfer applied to the cap. Neither is started until you have seen and approved a digital proof, so you know exactly what the decoration looks like before anything is produced.
What the cap is made of
- Polyester and spandex honeycomb mesh
- About 75 grams per cap
- UPF 50+ rated
- Velcro closure
- Fits approximately 55–60 cm head circumference
The honeycomb mesh and roughly 75-gram weight are what separate this from a heavy cotton cap: it breathes, and it stays light on the head through a long shift or a full round of golf. UPF 50+ coverage matters if the cap is doing outdoor work rather than sitting in a box. The Velcro closure and the 55–60 cm range mean one size covers most adult wearers, which keeps ordering simple whether you need one cap or fifty.
Shipping compared: standard, express, and air
Shipping is where the totals move the most, and the cheapest option depends on how many caps you order.
- Standard shipping: $15.99
- Express shipping: $39.99
- Air shipping, from quantity 6 upward: about $14.42 per cap
On a single cap, standard shipping is the obvious choice — express costs more than the cap itself. The picture changes at six caps or more, because the air rate is a per-cap figure while the standard and express rates are flat. Six logo caps at $23.99 each is $143.94, and six caps shipped by air at about $14.42 each adds about $86.52, for a total of roughly $230.46. Ordering six blank caps instead lands at $101.94 for the caps plus the same roughly $86.52 in air shipping. Both totals are simple arithmetic on the listed rates, so you can run the same calculation at your own quantity before you order. Orders ship within the US only.
How to order a custom mesh cap
Ordering runs in three steps, and each one is handled on a different page.
- Start with the design — upload or describe your logo and choose heat transfer. This is where the digital proof is generated for you to review.
- Check the FAQ if you are unsure about decoration methods, sizing, or what happens if the proof needs changes.
- Review shipping details to confirm your option before you place the order — standard at $15.99, express at $39.99, or air at about $14.42 per cap from quantity 6.
Once you approve the proof, the clock starts: 7–14 business days to produce your order.
FAQ
Do I have to order in bulk to get a custom mesh cap?
No. The minimum order is one cap. You can order a single logo cap at $23.99 or a single blank cap at $16.99. There is no bulk threshold you need to reach before the logo version becomes available.
Can I see the design before it is applied to the cap?
Yes. Heat transfer are both applied after you approve a digital proof. Production then takes 7–14 business days after that approval, so the proof step is what starts the timeline.
Which shipping option is cheapest for my order size?
For one or a few caps, standard shipping at $15.99 is the lowest cost. From quantity 6 upward, air shipping at about $14.42 per cap is worth comparing against the flat standard and express rates, especially since express is $39.99. All shipping is within the US.